ТОМ 87, №5
WELDING WITH MICROJET COOLING AS A METHOD OF IMPROVING THE PLASTIC PROPERTIES OF WELDS
The goal of the paper is to provide new welding technology based on microjet cooling just after the welding and to investigate the possibilities of improving the plastic properties of welds. This is possible because in this case the welds have a beneficial structure with a high amount of acicular ferrite (AF) in a weld metal deposit (WMD). A very high percentage of AF in the WMD (55–75%) cannot be obtained by an ordinary welding method (basic electrodes, MIG/MAG (Metal Inert/Active Gas), and TIG (Tungsten Inert Gas)). Welding with microjet cooling is very promising and capable of industrial application, mainly due to the significant improvement of weld quality and reduction of costs.
Автор: D. Hadryś and J. Piwnik
Ключевые слова: welding with microjet cooling, acicular ferrite, plastic properties
D. Hadryś and J. Piwnik. WELDING WITH MICROJET COOLING AS A METHOD OF IMPROVING THE PLASTIC PROPERTIES OF WELDS // Инженерно-физический журнал. 2014. ТОМ 87, №5. С. 1123.
Возврат к списку